I recently purchased this MINI WIFI RGB strip controller (no remote, RGBW version) aka "MagicHome LED Controller" to flash it with the open-source Tasmota software.

AliExpress.com Product - Wireless WIFI LED Controller RGB DC5-24V Bluetooth RGBW IR / RF Remote Control Google Home Mini For LED Strip RGBWW Controller

Mine had no test points to solder the serial adapter wires, so I had to use the ESP pins directly.

After flashing the module, open the web-if and set it up as "18 Generic" module:

Pin Dropdown
GPIO 5 PWM2
GPIO 12 PWM1
GPIO 13 PWM3
GPIO 15 PWM4

Test with the following commands

Command Action
Color 1 Color Red
Color 2 Color Green
Color 3 Color Blue
Color 000000FF Test full bright white
Fade 1 Use fading for on/off/change
Scheme 2 Auto color changing, use with Speed [1-10]

Next Post